🏗️ ProFilter™ Multimedia Filtration Skid
Deep-Bed Anthracite-Sand-Garnet Filtration
ProFilter™ multimedia vessels use staged beds of anthracite, silica sand, and garnet to remove suspended solids, iron, and silica to single-digit NTU levels — critical for protecting downstream membranes and injection wells.
Each pressure vessel is sized for a service flow rate of 8–12 gpm/ft² with full automatic backwash at 15 gpm/ft². Backwash sequencing — air scour, low-rate rinse, full backwash, settle, return-to-service — is programmed into the on-skid PLC with operator override at the HMI.
Designed for continuous duty in dirty service: ASME-stamped vessels, internally lined with vulcanized rubber or fusion-bonded epoxy, with replaceable hub-and-lateral underdrains.
Full Specifications
- Flow Rate
- 5–300 GPM/vessel with systems capable of 1 - 500 m3/hr.
- SS Removal
- >97% to the designed micron level
- Turbidity Outlet
- <1 NTU typical
- Backwash
- Auto or timed - typically once every shift. the backwash water is regenerated through proprietary digestion of hydrocarbons, sulfides and ammonia.
- Media
- Anthracite / silica sand / garnet / Activated Clay / Zeolite / custom resin
- SERVICE RATE / FORWARD FLOW RATE
- 8–12 gpm/ft²
- Backwash Rate
- 15 gpm/ft² + air scour
- Vessel Code
- ASME VIII Div 1
- Internal Lining
- Rubber or FBE
- Underdrain
- Hub-and-lateral or strainer plate
- Differential Pressure Trigger
- 8–10 PSI or as per the water contaminant study and characterization
- Cycle Length
- 8–14 hours typical for the usual range of solids and oil loading rates
Configure your ProFilter™ Multimedia Filtration Skid
Submit your water chemistry, flow rate, and site conditions — our engineers will return a sized configuration and process datasheet.